13
ENGLISH
HOW TO ATTACH A HUMIDIFIER
HOW TO ATTACH A HUMIDIFIER
ATTACH A HUMIDAIRE 3
i
HUMIDIFIER
Please refer to the illustration in section E of the illustration sheet, and your HumidAire 3i
manual.
The
HUMIDAIRE 3
i
attaches to the front of the S8 ESCAPE to provide heated
humidification. No other accessories are required for its use.
Notes:
a. Make sure the water chamber of the HumidAire 3i is empty before you attach or
detach the humidifier.
b. Remove the connector plug on the S8 Escape (see section A of the illustration
sheet) before you attach the HumidAire 3i. Reattach the connector plug firmly
after you detach the HumidAire 3i.
S
TORING THE HUMIDAIRE 3
i
Store the HUMIDAIRE 3
i
in the larger, mesh-top pouch of the S8 ESCAPE carry bag when
not in use.
ATTACH A HUMIDAIRE HUMIDIFIER
Please refer to the illustrations in section I of the illustration sheet.
To connect your
S8 ESCAPE to a HUMIDAIRE humidifier you need medium sized
21” (52 cm) air tubing.
1 Fill the HUMIDAIRE water chamber and place inside the HUMIDAIRE. Connect the
medium 21” (52 cm) and long 6’6” (2 m) air tubing (I-1), and close the humidifier lid.
2 Place the S8 ESCAPE on top of the HUMIDAIRE (I-2) and connect the free end of the
medium air tubing to the air outlet (I-3).
Note: To avoid water spilling into the
S8 ESCAPE, do not put it underneath the humidifier.
3 Assemble your mask system and connect it to the free end of the long air tubing (I-4).
4 Plug the HUMIDAIRE power cord into a power outlet. Connect the S8 ESCAPE power
cord to the socket at the rear of the
S8 ESCAPE and plug the other end into a power
outlet.
Please refer to the HumidAire User’s Manual for further details.
WARNING
Make sure that the power cord and plug are in good condition and the equipment
is not damaged.
The
S8 ESCAPE is now ready for use with the HUMIDAIRE.
