22
Beyond the Basics
S-S.ALt ................................................................................... Alert settings
S-S.Lit ............................................................................. Back light settings
S-S.PS .......................................................................Pager screen settings
S-S.OnlY ...............................................................................Mode settings
To turn off normal scanning, when Signal Stalker I is
running, turn S-S.OnlY setting to ON.
S-S.Int ....................................................................Voice interrupt settings
To keep Signal Stalker I active while receiving an audio
signal, set this function to ON. If you turn this function
OFF, the scanner does not check signals while receiving
an audio signal.
S-S.LOG ............................................................................Logging settings
Set S-S.LOG to ON to scan the log channels along with the
normal channels.
4. For other settings, press or to select ON or OFF, then press
E/PGM.
5. Press . /CLR /DELAY to exit the option mode.
6. Press MENU to exit the menu mode.
data skip
Data skip prevents the scanner from stopping on nonmodulated or
data signals (such as fax or modem transmissions) during a search
or scan.
Data skip does not apply to the air band and weather
search mode, as data signals are not generally found in
these services.
To turn on the data skip feature, complete the following steps:
1. Turn off the priority feature if it is on.
2. Press MENU.
3. Repeatedly press or to display dAtA-S, then press E/PGM.
4 . Press or to select OFF or ON, then press E/PGM.
NOTE
