15
CASSETTE PLAYER OPERATION
Your CD-3318 uses a dual-cassette
deck system, which lets you play cas-
sette tapes from either of two decks
and record from a variety of sources.
LOADING A CASSETTE
TAPE
Note:
Take up any slack in the tape by
turning the cassette’s hub with a pen-
cil. If you do not remove excess slack,
the tape might become tangled in the
record/playback mechanism. Avoid
touching the tape.
1. Press
STOP/EJECT
to open
the cassette compartment cover.
2. Insert the cassette tape into the
tape guides on the compartment
door with the side you want to
play facing you and the exposed
tape edge facing down.
3. Close the cover.
PLAYING A CASSETTE
TAPE
Single Play
After loading a cassette tape in either
deck, follow these steps to play it.
1. Set
RADIO.CD OFF
to
TAPE
.
2. Press
PLAY
on the appropriate
deck. The POWER indicator lights
and the tape player plays the cas-
sette tape until it reaches the end,
then it automatically stops.
Notes:
• To temporarily stop playback,
press
PAUSE
. Press
PAUSE
again to resume playback.
14-542.fm Page 15 Wednesday, June 30, 1999 3:38 PM