21
CASSETTE PLAYER OPERATION
PLAYING A CASSETTE
Caution:
We recommend using C-60
or C-90 cassette tapes. Avoid using C-
120 cassette tapes. They are very thin
and can easily become tangled in the
tape-handling parts.
Follow these steps to play a tape.
1. Take up any slack by turning the
cassette’s hub with your finger or a
pencil. Avoid touching the tape.
2. Insert the tape into the cassette
compartment with its open edge to
the right.
The tape begins to play, and the
direction indicator ( or )
appears.
3. If you are playing a metal tape,
press
MTL until MTL appears on the
display.
4. If you are playing
a tape encoded
with the Dolby B
NR system, press
. appears.
Press again when you finish play-
ing a Dolby tape.
5. Adjust the volume, bass, treble, bal-
ance, and fader settings as desired.
Notes:
• When the tape reaches the end of
one side, the cassette player
automatically changes the tape’s
direction and plays the other side
of the tape.
• During play, you can switch to the
other side of the cassette by
pressing and at the same
time until the indicator on the dis-
play changes direction.
6. Press to stop and eject the tape.
12-2115a.fm Page 21 Wednesday, January 12, 2000 11:18 AM
