2-1
2
First Time Installation and
Configuration
Follow the procedure below to implement First Time Installation and
Configuration of the RMX system:
1 Hardware Installation and Setup
2 Configuration Preparations
― Get the information needed for network configuration.
― Get the product activation key.
3 First Time Configuration
― Connect your computer to RMX
― Log in to the Web interface.
― Modify the default IP address.
― Configure other network options.
― Synchronizing System Time
Hardware Installation and Setup
Install the hardware and connect lines as described below:
1 Put the RMX product on a stable surface at the installation site.
2 Carefully take the RMX device out of the package. You can install the
device in the rack or position it on an even surface.
― Mount the RMX in the rack:
Install rack brackets, supplied by the rack manufacturer, in the rack.
Mount the RMX on top of the rack brackets.
Fasten the RMX to the rack with screws.
