12
Add a watermark to your pictures.
You can use the Direct Connect configuration software
to add a watermark containing a logo or text (or both)
as shown in Figure 2 to all pictures you print.
The watermark location is limited to one of four pic-
ture quadrants, which you select during setup.
a
At the Direct Connect software main window, click the
Watermark button.
The current watermark location appears as a rectangle
in one of the four quadrants of the image area, as
shown in Figure 3.
b
To choose a different quadrant for the watermark, click
the desired quadrant to move the watermark rectangle.
For example, to move the watermark rectangle to the
6
Figure 2. Picture with a watermark
Figure 3. Watermark rectangle
