Controls and displays04
22
En
1 SIGNAL SELECT indicators
Lights to indicate the type of input signal
assigned for the current component:
AUTO : Lights when AUTO signal select is on.
DIGITAL : Lights when a digital audio signal is
detected.
2 DIGITAL : Lights when a Dolby Digital signal
is detected.
ANALOG : Lights when an analog signal is
detected.
DTS : Lights when a source with DTS audio
signal is detected.
2 DTS
When the Standard mode of the receiver is on,
this lights to indicate decoding of a DTS signal.
3 2 DIGITAL
When the Standard mode of the receiver is on,
this lights to indicate decoding of a Dolby
Digital signal.
4 2 PRO LOGIC II
When the Standard mode of the receiver is on,
this lights to indicate Prologic II decoding.
5ATT
Lights when INPUT ATT is used to attenuate
(reduce) the level of the input signal (can only
be used with an analog signal).
6 DIRECT
Lights when source direct playback is in use.
Direct playback bypasses the tone controls and
channel levels for the most accurate reproduc-
tion of a source.
7 MIDNIGHT
Lights during Midnight listening.
8 MONITOR
Lights when MONITOR is selected.
9 RF ATT
Lights when the RF ATT is on (page 36).
10 EON and ‡
The ‡ indicator lights to inform you that the
currently tuned station carries the EON data
service. When the EON mode is set, the EON
indicator lights, but during actual reception of
an EON broadcast the EON indicator will flash.
RDS: Lights when an RDS broadcast is
received.
11 Character display
12 ADV. SURR. (Advanced Surround)
Lights when one of the Advanced Surround
listening modes of the receiver is selected.
Display
dB
SIGNAL
DIGITAL DIGITAL
ANALOG
DTS
DIGITAL ATT RFATT EON
DIRECT
Re-EQ
MIDNIGHT
LOUDNESS
MONO
SP A B
STEREO
TUNED
RDS
MONITOR
Neo:6
PROLOGIC
ADV.SURR.
AUTO
1 10
2
3
4
5
6
78
9
11
15
1312
14
16
XRE3068A.En.20.25 03.2.3, 11:09 AM22
