37
Music Server Play
Selecting the playlist mode
In playlist mode, a playlist file is used to distin-
guish a group of tracks that have been defined
as a group when recorded. This mode allows
you to play back the tracks you want to hear as
a group. (See page 31.)
1. Press FUNC and NEXT and then press
P.MODE to select the playlist mode selec-
tion mode.
2. Press P.MODE to select the desired
playlist mode.
Press P.MODE repeatedly to switch
between the following mode:
All (each recording date) = Digital (digital
recordings) = Analog (analog recordings)
= Artist (artist) = Custom (custom)
Note:
• If you switch to playlist mode when nothing has
been recorded, “No PlayList” or “No audio” is dis-
played.
Deleting tracks and track infor-
mation
In playlist mode it is possible to delete tracks
and track information recorded in playlist mode.
However, in “All” mode, the track data is delet-
ed along with the track information. With the
“All” mode, the confirmation screen will show
other items than those selected, so always veri-
fy this when using this mode.
When selecting “All”
When selecting other than “All”
Erasing a track from playlist file
Precaution:
• Once a track is erased, it can not be restored.
Always check the confirmation screen before eras-
ing.
1. Press
55
or
∞∞
to select the desired
playlist file.
2. Press FUNC and then press NEXT twice.
3. Press ERStrk to select the one-track
erase mode.
4. Press
22
or
33
to select the desired track.
5. Press
55
to erase the currently playing
track from the playlist file.
6. Press
22
and then press
55
to select
“YES”.
• To prevent erasure of the track, press
33
and
55
and select “NO”.
Note:
• When the playlist file changes, the one-track erase
mode will be cancelled automatically.
• You can not adjust the volume while “YES” is
selected and during erasing.
