53
<CRB3644-B/U>53
Connecting an
external amplifier
When you connect an external
amplifier to RCA connectors,
please install according to the
amplifier manual.
Subwoofer output
CAUTION
A standard speaker's
input is rated 17.5 W input
(largest 40 W input).
When an amplifier is
connected to the RCA
output, make sure to
change the speaker that
corresponds to the output.
If you connect to a standard
speaker, this may cause to
catch fire, emit smoke, or
cause damage.
•
NOTICE
The output of an internal
amplifier will not stop even
when an external amplifier
is connected the RCA out-
put.
When cutting off the inter-
nal amplifier output cable,
protect the cut surface to
prevent short circuits.
Subwoofer output of this
unit is monaural. The
output level cannot be
adjusted with FADER/
BALANCE on the AUDIO
CONTROL Menu.
Beeps will not be audible
if an external amplifier is
connected to the Front
output.
•
•
•
Using the Steering
Controller
In vehicles equipped with one, you
can use the steering controller to
operate this product.
Operation button names and
functions.
Volume buttons (, )
Press to raise the volume level.
Press
to lower the volume level.
Mode selection button
(MODE)
• When power to this product is
OFF:
Press the button and power
switches ON.
• When power to this product is ON:
Each time you press the button the
source* changes. If you continue
pressing the button for an extended
period, power to this product
switches OFF.
* The source switches in the follow-
ing order:
FM1 FM2 (SAT1) (SAT2)
(SAT3) CD(MP3/WMA/AAC)
(USB/iPod) (Bluetooth-Audio)
(AUX) AM FM1
