N
ow that you have looked up
the three-digit Remote Code
Number for your brand of device,
you are ready to follow the five
simple steps below.
Please read through steps 1-5
before beginning.
Place the TV/VCR/ACC
Mode Switch in the proper posi-
tion.
Press the (A/CH) • RECORD
button on the remote control and
release.
Press the SmartSound button
on the remote within 30 seconds,
then release.
Enter the THREE-DIGIT
REMOTE CODE NUMBER
for your desired device. The
remote is now ready to send
commands to the unit.
Point the remote at the
Device. Press the POWER button
on the remote to turn the unit
ON.
Cable Converter
SMART HELP
Remember, if this doesn’t
work the first time, repeat steps
using the same remote code number.
If after a second try and the remote
does not operate your device, see if
there is another three-digit code num-
ber (pages 33-34) listed for your
device and repeat the steps above
using the new number.
If after repeated attempts and the
direct access code number method
does not work your device, try the
SEARCH METHOD on page 32.
