May 1992 4
Philips Semiconductors Product specification
2 x 6 W stereo car radio power amplifier TDA1519
PINNING
FUNCTIONAL DESCRIPTION
The TDA1519 contains two identical amplifiers with differential input stages. The gain of each amplifier is fixed at 40 dB.
A special feature of this device is the mute/stand-by switch which has the following features:
• low stand-by current (< 100 µA)
• low mute/stand-by switching current (low cost supply switch)
• mute condition.
RATINGS
Limiting values in accordance with the Absolute Maximum System (IEC 134)
1 INV1 non-inverting input 1
2 GND1 ground (signal)
3 SVRR supply voltage ripple rejection
4 OUT1 output 1
5 GND2 ground (substrate)
6 OUT2 output 2
7V
P
supply voltage
8 M/SS mute/stand-by switch
9 −INV2 non-inverting input 2
PARAMETER CONDITIONS SYMBOL MIN. MAX. UNIT
Supply voltage
operating V
P
− 18 V
non-operating V
P
− 30 V
load dump protected during 50 ms;
t
r
≥ 2,5 ms V
P
− 45 V
AC and DC short-circuit-safe voltage V
PSC
− 18 V
Reverse polarity V
PR
− 6V
Energy handling capability at outputs V
P
= 0 V − 200 mJ
Non-repetitive peak output current I
OSM
− 4A
Repetitive peak output current I
ORM
− 2,5 A
Total power dissipation see Fig.2 P
tot
− 15 W
Crystal temperature T
c
− 150 °C
Storage temperature range T
stg
−55 + 150 °C
