A SERVICE OF

logo

Open as PDF
next previous
11
EN
Troubleshooting
How do I reset my player?
Insert a small pin or other sharp object into the reset hole located at the left of the player. Hold
until the player shuts down.
If none of the above works, then you may have to use the Device Manager to
recover your player:
1 Launch the Philips Device Manager at Start > Programs > Philips Digital Audio
Player > SA30XX > Philips SA30XX Device Manager on your PC.
2 Press and hold the 2; button while your player is connecting to the PC.
3 Keep holding the key until the Philips Device Manager acknowledges your player and goes
into recovery mode.
4 Click the Repair button and follow the instructions given by the Device Manager.
5 After the player has been repaired, disconnect it from your PC and re-start.