Philips 26PW9100D Manual

A SERVICE OF

next previous

19

HOW TO USE THE PIP (PICTURE-IN-PICTURE) CONTROLS

ON/OFF PIP:

1

Turn the TV and the external accessory device

(if using one) ON. Choose a digital program

(from TV mode). Choose an analog program

(from TV, AV1, AV2, CV1, Front). Press the

AV button to select which external sources

you want (eg. AV1, AV2, etc).

2

Press

the

PIP

button on the remote control

to display the

PIP

window on the screen’s top

right hand corner.

3

Press the

PIP

button on the remote control

again to display the Double Window

PIP

.

4

Press the

PIP

b

utton on

the remote control

a

third time to switch off the

PIP

feature.

POWER

PIP

P

icture-In-Picture (

PIP

) is a feature that allows the display of two pictures on the TV screen at the same time. (One main screen

picture and one small inset picture or

PIP

picture.) With only a cable or antenna signal connected, the

PIP

feature can display one

channel (an analog channel) on the main screen while showing another channel (a digital channel) in the

PIP

window.

The Double Window

PIP

feature divides the screen in half displaying the main picture and

PIP

window into equal size windows (left

side showing the main picture and right side showing the

PIP

picture).

The

S

WAP PIP

feature interchanges the picture on the main screen and the

PIP

window and vice-versa.

The

CH+

or

CH–

selects all the available channels on the

CH–

CH–

PIP

window.

NOTE:

Pressing the

numeric

buttons will not change the channels in the

PIP

window. They are for use with the main screen

PIP

PIP

picture only.

The signal from an external accessory device can also be used to generate a

PIP

picture. VCRs, DVD players, or similar devices can

be used to create the signal. The

PIP

window can display signals coming from the RF inputs, the AV1, AV2, CVI, S-Video or the Front

Jacks.

For basic connection instructions, please refer to the Audio/Video Input Jacks section in the Connection Guide.

Swap PIP:

1

Press

SWAP

to interchange the picture on

the main screen with that of the

1

PIP

window.

2

Press

SWAP

again to return the pictures to

their original positions.

SWAP

C

M

Y

CM

MY

CY

CMY

K

ATSC_pg19.pdf 2006-08-16 4:49:54 PM