10
Connect power
Caution
Risk of product damage! Ensure that the power supply •
voltage corresponds to the voltage printed on the back
or the underside of the Micro Hi-Fi.
Before connecting the AC power cord, ensure you have
•
completed all other connections.
1 Connect the AC power cord to the wall
socket.
3 Connect
Connect speakers
Note
Insert the stripped portion of each speaker wire into •
the socket completely.
For optimal sound, use the supplied speakers only.
•
Connect only speakers with impedance that is the •
same or higher than the supplied speakers. Refer to the
Specifi cations section of this manual.
To insert each speaker wire: Hold down the
socket fl ap. Insert the speaker wire fully. Release
the socket fl ap.
1 For the right speaker, fi nd the sockets on
the main unit marked ‘RIGHT’.
2 Insert the red wire to the red (+) socket.
3 Insert the black wire into the black (-)
socket.
4 For the left speaker, fi nd the sockets on the
main unit marked ‘LEFT’.
5 Repeat steps 2-3.
EN
