13
1 Turn on the TV to the correct viewing
channel for this product.
2 Press SETUP .
3 Press to select [Video Setup] .
4 Select [Progressive] > [On] , then press
OK .
A warning message is displayed. »
5 To proceed, select [Ok] and press OK .
The progressive setup is complete. »
Note
If a blank/distorted screen is displayed, wait for 15 •
seconds for the auto recovery.
If no picture is displayed, turn off the progressive scan
•
mode as follows:
1) Press
• to open the disc compartment.
2) Press the
• Numeric button ‘1’ .
6 Press SETUP to exit the menu.
7 You can now turn on the progressive scan
mode on the TV (see the TV user manual).
Note
During play, when the progressive scan mode is on for •
both this product and the TV, distorted picture may
display. In this case, turn off the progressive scan feature
on both this product and the TV.
English
EN
(1LQGG6HF(1LQGG6HF
