English
31
Problem Solution
Troubleshooting (continued)
Not able to select some items in the
setup/system menu.
The DVD player does not start
playback.
Picture freezes momentarily during
playback.
Unable to select Progressive Scan on/
off.
– Press STOP button twice before selecting the setup/system
menu.
– Depending on the disc availability, some menu items cannot
be selected.
– Insert a readable disc with the playback side facing down.
– Check the disc type, colour system (PAL/NTSC) and region
code.
– Check for any scratches or smudges on the disc.
– Press SETUP to turn off the setup menu screen.
– You may need to enter the password in order to change the
parental rating level or to unlock the disc for playback.
– Moisture may have condensed inside the system. Remove the
disc and leave the system turned on for about an hour.
– Disconnect the power cord from the power outlet for a few
minutes. Reconnect the power cord and try to operate again
as usual.
– Check the disc for ngerprint/scratches and clean with a soft
cloth wiping from centre to edge.
– Check that the output of the video signal is switch to
{ YPbPr }.
Need help? Visit us at www.philips.com/support
01-33 DVP3180K_93_eng1.indd 3101-33 DVP3180K_93_eng1.indd 31 2006-12-01 10:02:04 AM2006-12-01 10:02:04 AM
