16
Care
Caution
Never use solvents such as benzene, thinner, cleaners •
available commercially, or anti-static sprays intended
for discs.
Clean discs
Wipe the disc with a micro fibre cleaning cloth from
the centre to the edge in a straight line movement.
Specifications
Note
Specification and design are subject to change without •
notice
Accessories supplied
Remote control and batteries•
Power cord•
Audio/Video cables•
User manual •
Play media
DVD-Video, Video CD/SVCD, Audio CD, •
CD-R/CD-RW, DVD+R/+RW, DVD-R/-RW,
DivX-CD, Picture CD, MP3-CD, WMA-CD,
USB flash drive
USB
Compatibility: Hi-Speed USB (2.0)•
Class support: UMS (USB Mass Storage Class)•
TV standard
Number of lines:•
625 (PAL/50Hz); 525 (NTSC/60Hz)•
Play: Multi-standard (PAL/NTSC)•
Video performance
Video DAC: 12 bits, 108 MHz•
Y Pb Pr: 0.7 Vpp ~ 75 ohm•
Video output: 1 Vpp ~ 75 ohm•
Video format
Digital compression:•
MPEG 2: DVD/SVCD•
MPEG 1: VCD/DivX•
Horizontal resolution:•
DVD: 720 pixels (50 Hz); •
720 pixels (60 Hz)
VCD: 352 pixels (50 Hz); •
352 pixels (60 Hz)
Vertical resolution:•
DVD: 576 pixels (50 Hz); •
480 pixels (60 Hz)
VCD: 288 lines (50 Hz); 240 lines (60 Hz)•
Note
Ensure that the subtitle file has the exact same file name •
as the movie file. If for example the file name of the
movie is ‘Movie.avi’, then you need to name the text file
‘Movie.sub’ or ‘Movie.srt’.
[Version Info]
Display the software version of this product.
Tip
This information is required when you want to find out •
if a newest software version is available at the Philips
website that you may download and install on this
product.
[Default]
Reset all the settings of this product to factory
default, except for [Disc Lock], [Parental] and
[Password] settings.
7 Additional information
Update software
For software updates, check the current software
version of this product to compare with the latest
software (if available) at the Philips website.
Caution
Power supply must not be interrupted during software •
upgrade.
1 Press SETUP.
2 Select [Preferences] > [Version Info], then
press OK.
Stop disc play before you can access to •
[Preferences].
3 Write down the software version and the
model name, then press SETUP to exit the
menu.
4 Visit www.philips.com/support to check for
the latest software version.
5 Refer to the upgrade instructions on the
website for more information.
Note
Disconnect the power cord for a few seconds and •
connect again to turn on the product.
EN
