13
3 Press to enter the [On timer] menu.
4 Press to select [Activate] and set a
day of the week or frequency.
5 Press OK to conÀ rm.
6 Press to select [Time] and set the
starting time.
7 Press [Done] to conÀ rm.
8 Press to select [Program no.] and
set the channel.
9 Press OK to conÀ rm.
10 Press MENU to exit.
Tip
Select [Off] to switch off [On timer] .
When [On timer] is switched off, only
[Activate] option is available.
Set the TV clock before you activate [On
timer] feature (see ‘Set the TV clock’ on page
14 ) .
•
•
•
Use child control
You can prevent your children from watching
certain programs or certain channels by locking
the TV controls.
Set or change your PIN code
1 Press MENU .
2 Press to select [Features] > [Set
code] .
3 Press to enter the code setup.
4 Enter your code with the Numeric
buttons .
5 Re-enter the same code in the new dialog
box for conÀ rmation.
If the code is set successfully, the
dialog box will disappear. However, if
the code cannot be set, you will be
prompted to re-enter the code.
6 If you want to change the code, select
[Features] > [Change code] .
»
5 Press to choose the channel that
you wish to remove from the list.
6 Press OPTIONS .
7 Press to select [Unmark as fav.] .
8 Press OK .
The channel is removed from the
favorite list.
Use timers
You can set timers to switch the TV on or
switch to standby at a speciÀ ed time.
Automatically switch the TV to
standby (sleeptimer)
Sleeptimer switches the TV to standby after a
pre-deÀ ned period of time.
Tip
You can always switch off your TV earlier or
reset the sleeptimer during the countdown.
•
1 Press MENU
2 Select [Features] > [Sleep timer] .
The [Sleep timer] menu appears.
3 Press to set the sleep time.
The sleeptimer can be up to 180
minutes in steps of À ve minutes. If
set to zero minutes, the sleeptimer is
switched off.
4 Press OK to activate the sleeptimer.
The TV switches to standby after the
pre-deÀ ned period of time.
Automatically switch the TV on (on
timer)
You can switch the TV to a speciÀ ed channel
at a speciÀ ed time, from standby.
1 Press MENU .
2 Select [Features] > [On timer] .
»
»
»
»
English
EN
