14
How to Use the On Screen Display (OSD)
Geometry Controls window
Pincushion, Balanced
Pincushion, Balanced
Pincushion,
Pincushion,
T
T
r
r
apezoid,
apezoid,
P
P
ar
ar
allelogr
allelogr
am,
am,
R
R
ot
ot
a
a
tion
tion
Follow the steps below to adjust any of the five preset options (PINCUSHION, BALANCED PINCUSHION, TRAPEZOID,
P
ARALLELOGRAM, or ROTATION). You can make individual adjustments to each of the preset options. Note: use these
features only when the picture is not square.
Smart Help
To exit GEOMETRY CONTROLS . . .
. . . but continue to another window, turn the R
OTARY knob until EXIT is highlighted. Next, press the ON SCREEN DISPLAY button.Then, turn the ROTARY knob
until that window is highlighted. Now, press the O
N SCREEN DISPLAY button and follow the instructions for that window.
. . . completely, press the O
N SCREEN DISPLAY button and hold for 1.5 seconds.The On Screen Display will disappear.All changes will be saved.
To make changes to one item, follow the steps for that item. Then, follow
“
To exit GEOMETRY CONTROLS . .. .”
To return to factory presets, see “To Reset an Individual Window” on page 15.
Press the ON SCREEN
DISPLAY button.
2b
2b
1
1
2a
2a
Turn the ROTARY knob until the GEOMETRY
CONTROLS window is highlighted. Next,
press the O
N SCREEN DISPLAY button.
Then, if necessary, turn the R
OTARY knob until PINCUSHION icon
is highlighted.
Press the ON
SCREEN DISPLAY
button.Then, turn
the R
OTARY knob to
adjust the
pincushion.
4b
4b
Turn the ROTARY knob to
adjust the trapezoid.
4c
4c
When done, press the
O
N SCREEN DISPLAY button.
This will save the
change and return the
screen to G
EOMETRY
CONTROLS window.
To select PARALLELOGRAM or
R
OTATION, turn the ROTARY knob
until P
ARALLELOGRAM or ROTATION
icon is highlighted. Next,
press the O
N SCREEN DISPLAY
button.Then follow steps 4b
and 4c to make the
appropriate changes.
5a
5a
5c
5c
