Switching the On-screen display (OSD) on
or off
You can switch the On Screen Display of the current operating
information on or off.
a Press the MENU button. The main menu appears.
b Select the line ’Setup’ with the menu buttons
P rB or AP q and confirm with the SqC button.
SETUP
Parental control OFF
Display MAX
ã Exit:
« press MENU
c Select the line ’Display’ with the menu buttons
P rB or AP q .
d Select one of the options indicated with the menu buttons
SqC or DSr .
’MAX’: The OSD appears for a few seconds each time an
operating mode is selected and then disappears.
’MIN’: The OSD is reduced to a minimum.
’PROGR.’: The programme number is always shown.
’COUNTER’: The tape position is always shown.
e Confirm with the OK button.
f To end, press the MENU button.
DWith the OK button you can superimpose the On
Screen Display of current operating mode on the TV
screen.
Continuous playback
You can automatically play a cassette again and again. When
the end of the tape or the recording has been reached, it will
rewind and start again.
a Press the MENU button. The main menu appears.
b Select the line ’Tape’ with the menu buttons P rB or
AP q . Confirm with the menu buton SqC .
TAPE
Tape speed SP
Repeat play OFF
Jitter N. ACT.
Tracking (,,,,,,=,,,,,$
Cleaning N. ACT.
ã Exit:
« press MENU
c Select the line ’Repeat play’ with the menu buttons
P rB or AP q .
d Select ’ON’ with the menu buttons DSr or
SqC . If you select ’OFF’, the function will be
switched off.
e Confirm with the OK button.
f Press the MENU button.
19
