C1609M (6/04) 1
Introduction
The following instructions serve as a guide for upgrading the storage capacity of the DX8000 Series digital video recorder
(DVR). Included are step-by-step directions for installing one to three additional hard disk drives in the DX8000 using the
DX8000-UP250 hard disk upgrade kit. The following illustrates how to upgrade your DVR to a four-drive system.
IMPORTANT: If this upgrade requires the replacement of the DX8000’s primary/system hard disk drive (drive 1
nearest the CD/DVD drive), refer to the instructions for replacing the primary drive (manual number C1606M).
This manual should be included with this upgrade kit if a primary drive replacement is necessary.
PARTS LIST
NOTE: This upgrade kit includes one or more Pelco-certified hard disk drives. Using any other hard disk drives
with the DX8000 voids the manufacturer’s warranty for this product.
Quantity Description
1 to 4 250 GB hard disk drive(s)
1 or 2 80-pin straight IDE data cable(s)
2 or 4 Mounting screws
1 DX8000-EXD IDE extender card (manual, driver diskette, and hold-down bracket)
TOOLS NEEDED
1 Phillips-head screwdriver #1 (nonmagnetic)
1 Properly grounded ESD wrist strap and mat
4 Small containers for storing screws (optional)
