A SERVICE OF

logo

14 C2676M (9/07)
REINSTALLING THE MOUNTING BASKET
1. To reinstall the HDD mounting basket:
a. Gently lower the basket into place. Be careful not to force the basket free or to disturb other
components inside the unit.
b. Using a Phillips screwdriver, fasten the four screws that attach the drive basket to the
chassis.
Figure 12. Replacing the Mounting Basket
2. To reconnect the SATA data and power cables do the following:
a. Grasp each side of the SATA data connector and carefully and evenly push the connector on
to the drive data connector. Ensure that the plug is pushed all the way on the drive data
connector.
b. Grasp the top and bottom of SATA power connector and carefully and evenly push the
connector on to the drive power connector. Ensure that the connector is pushed all the way on
the power connector.
3. Repeat step 3 for each HDD being installed.
Figure 13. Reconnecting the Data and Power Cables