A SERVICE OF

logo

12 C3646M-C (6/09)
INSTALLING THE JUMPERS FOR CE COMPLIANCE (ONLY CM9700UTP16A)
1. Unplug the unit to turn off the power.
2. Unscrew the six, black 4-40 x 0.25-inch Phillips flat head screws that secure the cover to the chassis.
3. Remove the cover.
4. Install the 16 jumpers on the pins; use one for each channel (refer to Figure 7). The pins are labeled J66 through J81.
Figure 7. Installing the Jumpers for CE Compliance
INSTALLING THE JUMPERS FOR CE COMPLIANCE (ONLY CM9700UTP32A)
If you require jumpers for the 32-channel model (CM9700UTP32A), contact Pelco Product Support at 1-800-289-9100 (USA and Canada) or
+1-559-292-1981 (international).
WARNING: To meet CE compliance standards, jumpers must be installed on channels 1 through 16.
CH1
6
CH
1
5
CH14
CH13
CH12
CH11
CH10
CH9
CH5
CH4
CH3
C
H
2
CH1
CH8
CH7
CH6
J81
J80
J
7
9
J
7
8
J7
7
J
76
J
75
J
74
J
70
J
6
9
J
6
8
J
67
J6
6
J
7
3
J
7
2
J
7
1
CH3
CH4
CH5
CH2
CH1
J68
J69
J70
J67
J66