A SERVICE OF

logo

PCA-6005 User’s Manual 24
2.11.6 Connecting to SNMP-1000 remote manager
Use the 6-pin to 8-pin cable to connect the CPU card to SNMP-1000.
This cable comes with the SNMP-1000.
2.12 ATX Power Control Connectors (CN20 and
CN21)
2.12.1 ATX feature connector (CN20) and soft power
switch connector (CN21)
The PCA-6005 can support an advanced soft power switch function if an
ATX power supply is used. To enable the soft power switch function:
1. Take the specially designed ATX-to-PS/2 power cable out of the
accessory bag.
2. Connect the 3-pin plug of the cable to CN20 (ATX feature connec-
tor).
3. Connect the power on/off button to CN21. (A momentary type of
button should be used.)
Note: If you will not be using an ATX power connector,
make sure that pins 2-3 of CN20 are closed.
CN21 CN18
CPU Card
CN19 CN29
SNMP-1000
CN19
PIN 1
PIN 1
CN20