18
RQT9777
≥For a safety measure to prevent the speakers from falling, refer to page 20.
≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Assemble the speakers following step 1 of “Place the speakers
vertically” (> 14).
Insert the speaker cable through the speaker base and connect the
speaker cables.
≥ Be sure to insert the speaker cable through the threading hole as indicated in the illustration.
§ If you have difficulty inserting the cable, try straightening the speaker cable and then bending the
cable about 20 mm (
25
/32q) from the tip, at an angle of approx. 45
o
(as illustrated above).
Place the speakers using the speaker
bases
∏ 2 Speakers ∏ 2 Speaker cables
WHITE: Left
RED: Right
∏ 2 Stand necks
∏ 2 Speaker bases ∏ 4 Screws
1 Insert the wire fully.
r: White
s: Blue line
≥ Insert the wire fully, taking
care not to insert beyond
the wire insulation.
2 Press into the groove.
45
SC-HTB370PPC_RQT9777-1P_mst.book Page 18 Tuesday, January 29, 2013 11:48 AM
