Other equipment and antennas
CAUTION:
TO PREVENT ELECTRIC SHOCK
MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
The included AC power supply cord is for use with
this unit only. Do not use it with other equipment.
Note
Conserving power
The unit consumes 1 W even when it is turned off with [POWER, ^/l]. To save power
when the unit is not to be used for a long time, unplug it from the household AC outlet.
If the unit is left unplugged for longer than a few weeks, all settings will revert to the
factory settings. Do the settings again if this occurs.
Household AC outlet
(AC 120 V/60 Hz)
Connect this cord after
all other cables and
cords are connected.
AC power supply cord
(included)
“SWITCHED” AC outlet
Power to the outlet is controlled by the power switch
of this unit. Audio equipment rated up to a maximum
of 80 W can be connected here. If equipment
exceeding this rating is connected, the outlet may be
rendered inoperable. Consult your dealer to replace
the fuse.
Connecting the AC power supply cord and other information
PLAY
(OUT)
REC
(IN)
If you have a graphic
equalizer, connect it to the
TAPE terminals.
Tape deck
DIGITAL OUT
Fix the other end of the
antenna where reception
is best.
Adhesive tape
FM indoor antenna (included)
AM loop antenna
(included)
Step 1
Step 2
Step 3
Step 4
Before use
Others
Reference
To connect equipment, refer to the appropriate operating instructions.
Peripheral equipment and cables sold separately unless otherwise indicated.
LINE
OUT
Using the stand
Attach to the stand and
place on a flat surface.
Keep the antenna cord away from tape decks, DVD
players, and other cords.
Outdoor antennas
\
page 15
Antennas
or