Error display ( When the error display comes on, a buzzer sounds and U
and a number appear alternatively.)
Unable to drain
What to do:
Check the drain hose, making sure
●itisn’tcloggedup
●itstipisn’timmersedinwater
●itdoesn’textendfurtherthan3metres
●thewaterisn’tfrozen.
●Cleaningthedrainfilter
(see page 29)
Correct any
of these
problems, then
open the door,
shut it and start
the washing
machine again.
Door is open
What to do:
●Makesurethedoorisshutproperly.
Unable to spin-dry
What to do:
●Thelaundrymaybetooheavy.Ifso,
unravel a tangle of items.
●Thelaundrymaybetoolight.Ifso,add
one or two bath towels.
●Oneormoreitemsmaybetoolarge,
such as blankets. If so, reduce the load.
●Thewashingmachinemaybeonan
unstable or uneven surface.
Correct any
of these
problems, then
open the door,
shut it and start
the washing
machine again.
Unable to supply
water
What to do:
●Checkthetapisopen.
●
Check the water pipe or hose isn’t frozen.
●Checkthewatersupplyhasn’tbeen
disrupted.
●Checkthewater-supplyvalvefilterisn’t
clogged. (see page 28)
Correct any
of these
problems, then
open the door,
shut it and start
the washing
machine again.
Drain filter is not set
What to do:
●Makesurethedrainfilterissetproperly.
(see page 29)
●AnerrordisplaystartingwithHdoesn’tsoundthebuzzer.
Press the power OFF button. If the display stays on, or
it reappears when you press the START button, unplug
the washing machine and contact your nearest Customer
Service Centre.