Preparation
17
7
Press OK .
8
Enter the current month and day by
using a 4-digit number.
(Ex. To set Dec. 27, enter “1227”.)
9
Press OK .
10
Enter the current year by using a 4-digit
number.
(Ex. To set the year 2001, enter “2001”.)
11
Press OK .
• A beep sounds.
• The clock starts working.
• To return to the standby mode, press
(EXIT).
09:30
PM
01/01
2000
ENTER MONTH/DATE
09:30
PM
12/27
2000
ENTER MONTH/DATE
09:30
PM
12/27
2000
ENTER YEAR
09:30
PM
12/27
2001
ENTER YEAR
9:30
PM
12/27
SET CLOCK ?
• You can go back to the previous display by pressing , when setting
the time and date.
• If 6 beeps sound when entering the time and date, a wrong number was
entered. Enter the correct time and date.
For Caller ID service users (p. 26)
• The Caller ID information will re-set the clock after the first ring if the
adjusted time and/or date is incorrect. However, if the time has not
previously been set, the Caller ID information will not adjust the clock.
• The Caller ID information will automatically adjust the clock for daylight
saving time.
If a power failure occurs or the AC adapter is disconnected from the base
unit for more than about 30 minutes, the time and date will be shown as
“12:00
AM
1/1” or “0:00 1/1”. Readjust the date/time.
