Advanced Settings
16
11. HDMI Setup
Setting Item Default Value Setting Details
HDMI CEC (RIHD) Off Setting to "On" enables the input selection link
and other link functions with HDMI connected
CEC compliant device.
"On": To enable this function.
"Off": When not using this function.
Depending on the TV set, a link may need to
be configured on the TV.
When this setting is set to "On", closing the
on-screen menu displays the name of the
CEC-compatible devices and "RIHD On" on
the display.
When this setting is set to "On", power
consumption in standby mode may increase.
(Depending on the TV status, the unit will
enter the normal standby mode.)
When this setting is set to "On" and you are
listening to the audio through the speakers
of your TV, operating the MASTER VOLUME
control of the unit outputs audio from the
speakers connected to the unit. If you want
to output audio from either of the unit or TV,
change the unit or TV settings, or reduce the
volume of the unit.
If misbehavior occurs when this setting is set
to "On", set this setting to "Off".
When connecting a non-CEC compatible
component, or when you are not sure whether
it is compatible, set the setting to "Off".
When making the change to this setting,
turn off and then on again the power of all
connected components.
Setting Item Default Value Setting Details
HDMI Through Off Allows video signals from an AV component
connected via HDMI to be output to the TV
independently of whether the AV receiver is
on standby. This setting is only valid for INPUT
SELECTOR buttons assigned to HDMI IN jack.
You cannot set this setting to INPUT SELECTOR
button which is not assigned to any HDMI IN
jack.
"Off": To disable this function. The input signal
from any HDMI IN jacks cannot be output to TV.
"BD/DVD", "CBL/SAT", "STB/DVR", "GAME",
"PC", "AUX", "TV/CD": Input signal from
components connected to the HDMI IN jack
assigned to each input selector is output to TV.
"Last": Input signal from the components
connected to input selector which was selected
just before the unit enters the standby.
"Auto": Input signal from all components
connected to HDMI IN jacks is displayed on TV.
"Auto (Eco)": Input signal from all components
connected to HDMI IN jacks is displayed on
TV. Selecting this setting when using CEC-
compatible TV, the power consumption on
standby is reduced. You cannot select this
setting, when "HDMI CEC (RIHD)" is set to "Off".
When "HDMI Through" is set, the power
consumption increases even when the unit is
on standby.
When making the change to this setting,
turn off and then on again the power of all
connected components.
