31
2
5. Specifying the Remote Fax
Direct entry with digital keys
Direct entry is the method for specifying remote Fax numbers using the digital keys.
1
Place the original(s).
• P.20 “Setting originals”
2
Press the [FAX] button on the control panel.
4
If you make a mistake, press the [CLEAR] button on the control panel
or the [BACK SPACE] button in the address menu and correct the
mistake.
• [CLEAR] button: Press this button to clear all values you have entered.
• [BACK SPACE] button: Press this button to delete each value you have.
When you are dialing to an outside line via a PBX, there may be a pause before the connection is made, causing
a transmission error. To avoid this error, press the [MONITOR/PAUSE] button after the number that designates
an outside line to enter a pause. This automatically enters a thee-second pause before the remote Fax number is
dialed, which reduces transmission errors. (The mark “-” is displayed as a “pause” on the screen.)
5
Press the [START] button.
3
Key in the remote Fax number.
