A SERVICE OF

logo

Open as PDF
next previous
17
6. SYMPTOM: THE DISPLAYS OF THE CONSOLE DO NOT FUNCTION PROPERLY
a
. Remove the screws from the hood. Carefully remove the hood.
Locate the Reed Switch (74) and the Magnet (95) on the left side
o
f the Pulley (17). Turn the Pulley until the Magnet is aligned with
the Reed Switch.
Make sure that there is a 1/8”gap between
the Magnet and the Reed Switch. If necessary, loosen the
Screw (90) and move the Reed Switch slightly. Retighten the
Screw. Re-attach the hood, and run the treadmill for a few min-
utes to check for a correct speed reading.
95
74
9
0
Top
View
1/8”
17