A SERVICE OF

logo

AIR CONDITIONER SPECIFICATION
LABEL
The air conditionerspecification label is affixed to
the underside of the hood as shown.
Use thefollowing stepsto mountthe frontlicense
plate:
1
Make a shallow hole in each plastic finisher
at the location mark (small dimple) using a
0.39 in (10 mm) drill. To avoid damaging the
threads behind the finisher, apply only light
pressure to the drill.
2
Mountthe licenseplate bracketusingtwo 10
mm slotted Phillip head screws.
WTI0178
WTI0179
INSTALLING FRONT LICENSE PLATE
9-12 Technical and consumer information