Rev. 1 - YML675 www.netcomm.com.au
NP5410 Wireless Ethernet Bridge User Guide Page 15
Configuring the NP5410
The Info Tab
State: Displays disconnected or associated connection status.
Wireless network name: (SSID) Displays current SSID of the NP5410.
If the NP5410 found no AP or any other ad-hoc device,
then SSID will show “non-spec”. Please make sure that
your wireless LAN is working properly under the
effective reach range of the NP5410
Channel: Displays the channel that the NP5410 is currently
using.
Transmission Rate: The transfer data rate that the NP5410 is using in
wireless LAN
Communications Strength: Displays the percentage of wireless LAN connection
integrity when connected to an AP.
BSSID: Displays MAC address of the AP that the NP5410 is
connecting with.
WEP: WEP status set in the bridge.
Adapter Name: Displays the name of this Ethernet Adapter (Adapter).
