This section provides technical information about the MultiSync LT100 Projector's performance.
Optical
DMD
TM
Single Chip Digital Micromirror Device(DMD
TM
), 1024ן768 dots
Lens Manual zoom, manual focus
F 2.44 f =26-30 mm
Lamp Metal halide lamp 280 W
Image Size 610-7620 mm (24-300 inches) diagonal
Projection Distance 1.2 – 12.3m
Contrast Ratio Greater than 200 : 1
Color Temperature 7000 Kelvin
SPECIFICATIONS6
89
Electrical
Inputs Video (NTSC / PAL / SECAM / NTSC 4.43)
RGB (H : 15 – 85 kHz, V : 50 – 85 Hz)
Video Bandwidth RGB: 60 MHz
Color Reproduction Full color, 16.7 million colors simultaneously.
Horizontal Resolution NTSC / YCbCr 550, PAL 350, SECAM 350, NTSC4.43 350 TV lines
RGB 1024 dots horizontal, 768 dots vertical
Power Requirement 100 – 120 / 220 – 240 VAC, 50 / 60 Hz
Input Current 4.6 A (100 – 200 VAC) / 2.2 A (220 – 240 VAC)
Mechanical
Dimensions
9.8" (W)ן5.6" (H)ן13.4" (D) / 25.0 cm (W)ן14.2 cm (H)ן34.0 cm (D) (Including lens hood and feet)
9.8" (W)ן5.6" (H)ן12.6" (D) / 25.0 cm (W)ן14.2 cm (H)ן32.0 cm (D) (Not including lens hood)
Net Weight 10.8 lbs / 4.9 kg
Operational Temperatures Projector: 41° – 95°F (5° to 35°C), 30 – 85% humidity
Remote control: 32° – 140°F (0° to 60°C)
Remote mouse receiver: 32° – 140°F (0° to 60°C)
Regulations UL Approved (UL 1950, CSA 950)
Meets DOC Canada requirements
Meets FCC Class A requirements
SPECIFICATIONS 90
Digital Light Proccessing, DLP, Digital Micromirror
Device and DMD are trademarks of Texas Instruments.
