E-52
8. SPECIFICATIONS
8. SPECIFICATIONS
This section provides technical information about the LT180 Projector's performance.
Model Number LT180
Optical
DMD Single Chip Digital Micromirror Device (DMD)
Resolution 1024ן768 pixels* up to 1080i with scaling technology
Lens Manual zoom and focus
F2.0 - 2.48 f=19.7 mm - 23.0 mm
Lamp 210W DC (168W Eco mode)
Image Size 30" - 200" diagonal
Projection Distance 31.4" - 220.4" (wide) / 37.7" - 262.2" (tele)
0.80 m - 5.60 m (wide) / 0.96 m - 6.66 m (tele)
Projection Angle 12.2° - 12.8° (wide) / 10.3° - 10.8° (tele)
Electrical
Inputs 1 VGA (Mini D-Sub 15 Pin), 1 S-Video (Mini DIN 4 Pin), Video (RCA),
1 Component (Y, Cb/Pb, Cr/Pr), 1 Stereo Mini Audio, 1 Audio L/R (RCA), 1 PC
Control (Mini DIN 8 Pin)
Outputs 1RGB (Mini D-Sub 15 Pin), 1 Stereo Mini Audio
Video Compatibility NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM, Component:1080i,
720p, 576p, 480p, 576i, 480i
Scan Rate Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over) / Vertical: 50 Hz to 85 Hz
Color Reproduction 16.7 million colors simultaneously, Full color
Horizontal Resolution NTSC / NTSC4.43/PAL / YCbCr: 540 TV lines
SECAM: 300 TV lines
RGB: 1024 dots (H)ן768 dots (V)
External Control IR, RS232C
Sync Compatibility Separate Sync / Composite Sync / Sync on G
Built-in Speaker 1W (Monaural)
Power Requirement 100 - 240V AC, 50 / 60 Hz
Input Current 3.2 - 1.5A
Power Consumption 280W in Lamp Normal mode
220W in Lamp Eco mode
7.0W in Standby mode
* Effective pixels are more than 99.99%
