59
4. Convenient Features
7. Check the password displayed in the screen projected by the projector.
8. Input the password to the password input box displayed by the operation at step 3 on page 57.
9. Click [Connect].
The network projector function works and the screen of Windows Vista is projected from the projector.
•
On Windows Vista Service Pack 1(SP1), if the resolution of Windows Vista screen is different from the projec-
tor’s screen resolution, changing the resolution of Windows Vista will display a message for prompting the
user to change the resolution of Windows Vista screen. Selecting [Yes] will change the resolution of Windows
Vista screen and proceed to the step of operating the network projector. Selecting [No] will cancel operating
the network projector.
NOTE: When the network projector function works, the background color of the desktop changes to black. When the network
projector function is stopped, the original background color is restored.
Reference: If the projector cannot be found at Step 5, click [
→
Enter the projector address]. Then, input the “Network ad-
dress” (Input example: http://10.32.97.61/lan) and “Projectorpassword” (Input example: 82291627) displayed in the screen
projected from the projector.
Exiting the Network Projector Operation
1. Click [Projecting: NP3250 Series] in the Windows Vista task bar.
2. Click [Disconnect].
The Network Projector function is stopped.
3. Press the SOURCE button of the projector to select an input terminal other than [NETWORK].
When using the remote control, press a button other than the NETWORK button.
