A SERVICE OF

logo

NI PXI-5600 Calibration Procedure 6 ni.com
Software
The following software is required for calibrating the NI PXI-5600:
NI RFSA 1.01—available on the RF Signal Analyzer software CD.
This CD installs NI-SCOPE 2.12, NI-TUNER 1.01, and the Spectral
Measurements Toolset.
Calibration DLL—Calibration API and examples are available for
download at
ni.com/support/calibrat/mancal.
The calibration procedure in this document provides step-by-step
instructions on calling the appropriate calibration functions, which are
described in the NI-TUNER Calibration API Function Reference section.
You can also program in LabVIEW using the example VIs that are included
with the calibration DLL.