ENGLISH
|
15
Using Your Canister Steam System
1. Follow Steps 1-3 of General Operation section above.
Refer to Page 9 for a listing of hard oor surfaces that are recommended for cleaning
with the Canister Steam System.
2. For best results, use a continuous back-and-forth motion over oor surface, pushing the Mop
Head away and pulling it back towards you. Work your way backwards over the oor, in order
to avoid walking over freshly mopped areas.
NOTE: To avoid warping or damage caused by heat and moisture, do not use on un-
sealed hardwood or unglazed ceramic surfaces. Steam may remove the sheen from
some oors that have been treated with wax.
3. The Microber Pad will absorb dirt and moisture during mopping. However, when you are
nished you may nd some residual moisture has been left behind. In this case, it is recom-
mended to allow oor time to air-dry. A fan may be directed towards mopped area to facilitate
drying.
