A SERVICE OF

logo

Open as PDF
next previous
41
Chapter 7: Configuring the Wireless-G Access Point
The Setup - AP Mode Tab
Wireless-G Access Point
Wireless Repeater. When set to Wireless Repeater mode, the Wireless Repeater is able to talk to up a remote
access point within its range and retransmit its signal. This feature only works with the Linksys Wireless-G
Router (model number: WRT54G) or another Wireless-G Access Point (model number: WAP54G).
To configure a Wireless Repeater environment, select Wireless Repeater and enter the MAC address of the
remote access point in the Remote Access Point’s LAN MAC Address field.
Figure 7-6: Wireless Repeater Diagram