27
• WEP Key Setting. This setting will be the configuration key used in
accessing the wireless network via WEP encryption. To generate an encryp-
tion key:
1. Type exactly the same case sensitive Passphrase in the PassPhrase field. For
security purposes, please create your own Passphrase.
2. Click the Done button to create the encryption keys. The Passphrase gener-
ates four unique keys.
3. Make sure that the Default Key is the same for each point on the wireless
network.
4. Click the Apply button to store the information.
5. Click the Yes button to accept the changes in the dialog box that appears.
• Password Setting. This option allows you to choose between Read/Write and
Read Only. For both options, you will be asked to type in a password and con-
firm it.
• Authorization Table Enable. This setting can be enabled here, but any setting
changes must be made through the SNMP Utility. It is recommended that this
setting be enabled using the SNMP Utility.
26
Wireless Network Access Point
THE INFO TAB
The Info tab displays general information about Linksys and the USB Utility.
The USB’s copyright date and version number are listed as well as the Utility’s
firmware version. At the bottom of the screen, you will find a button that will
access Linksys’ web page (once your internet connection is properly set up),
the email address for technical support, and the phone number to call for tech-
nical support.
Note: Once your Access Point is installed and con-
figured, the USB cable may be removed.
Instant Wireless
TM
Series
