Linksys RV042 Manual

A SERVICE OF

next previous

1.19 Select “DHCP” from the menu at the top of the screen. This will allow you to set the

DHCP Scope for the workstations.

Please insure that the Range Start & Range End are the beginning & ending of the

range provided by Galileo International excluding the address that will be used by

the router. Start Range will usually be 1 more than the address of the router itself.

1.20 Reserve the IP Address for the GPM/FPM workstation. In order for the inbound

Wakeup message to reach the GPM Workstation we need to reserve a static address for

the GPM workstation. The router allows for this by the Static Entry field. You will need

to obtain the Physical Address of the NIC card in the GPM box. You can accomplish this

by starting a DOS command box on the GPM workstation.

START RUN CMD (for Windows 2000 or Windows XP)

START RUN COMMAND (for Windows 9X)

19