Handling and Cleaning:
• Dirt, dust, scratches and warping discs will cause
problems with operation.
• Do not place stickers on disc or scratch disc.
• Do not warp discs.
• Keep discs in cases when not in use to
prevent damage.
• Do not place discs in the following places:
1. Direct sunlight.
2. Dirty, dusty and damp areas.
3. Near car heaters.
4. Car seats or dashboard.
Disc Cleaning:
Use a dry soft cloth to wipe the disc surface. If the
disc is quite dirty, use a soft cloth slightly moist
with isopropyl (rubbing) alcohol. Never use sol-
vents such as benzine, thinner or conventional
record cleaners as they may mar the surface of the
disc.
Note:
A disc may become somewhat scratched
(although
not enough to make it unusable) depend-
ing on handling and conditions in the usage envi-
ronment.
Preparing New Discs with Rough Spots:
A new disc may have rough edges on its inside and
outside edges. If a disc with rough edges is used,
the proper setting will not be performed and the
player will not play the disc. Remove the rough
edges in advance by using a ball point pen or pen-
cil as shown. To do this, press the side of the pen
or pencil against the inside and outside edges of
the disc.
