A SERVICE OF

logo

Open as PDF
next previous
5
STEP 2:
FIGURE 2
• LOOSELY assemble the two UPRIGHT SUPPORTS (3) to the four UPRIGHTS (2) using eight 1/2 X 4-1/4” BOLTS (16), eight 1/2”
PLASITC DOME WASHERS (17), eight 1/2” INT TOOTH LOCK WASHERS (19) and eight 1/2” LOCK NUTS (18) as shown in
FIGURE 2.
2
3
16
17
19
18
1/2 X 4-1/4”