Life Fitness GS4 Manual

next previous

FIGURE 5

10 3/8 X 1-3/4”

• Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5) to the

BRACKET (from 100 LEG PRESS kit) using one 3/8 X 1-3/4” BOLT (10), one 3/8” WASHER (11), one “L” CABLE RETAINER (3)

and one 3/8” LOCK NUT (12) as shown in FIGURE 5. Make sure the CABLE is in the grooves of all the pulleys.

• SECURELY attach the BRACKET (from LP5 LEG PRESS) to the SEAT FRAME using two 3/8” X 4-3/4” BOLTS (7), two 3/8” WASH-

ERS (11), and two 3/8” LOCK NUTS (12). See FIGURE 5.

7 3/8 X 4-3/4”

LEG PRESS BRACKET

STEP 5:

FIGURE 6

STEP 6:

• Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5) to the

bracket on the SEAT FRAME using one 3/8 X 1-3/4” BOLT (10) and one 3/8” LOCK NUT (12) as shown in FIGURE 6. Make sure the

CABLE is in the grooves of all the pulleys.

3/8 X 1-3/4” 10

SEAT FRAME