18
206-4157
PCS150R Configuration Options (Cont.)
(Continued from previous page)
10. When you are nished with network conguration, type exit at the Network Conguration
Menu
>
prompt. The system will display an overview of the new network conguration
and then prompt for conrmation to save the changes, for example:
New Network Configuration
Interface eth0
Host name: pcs150r
Using DHCP: YES
Interface eth1
Host name: pcs150r
Using DHCP: YES
DNS servers
Primary DNS: 68.94.156.1
Secondary DNS: 68.94.157.1
Do you want to save the new configuration? (Y/N):
11. Type y or n and press Enter, as appropriate.
If you opt NOT to save the new configuration, the system will return immediately to the
Main Menu
Command >
prompt. Otherwise, the system will confirm the configuration
updates and prompt you to reset the PCS150R:
New configuration has been saved. Please restart the system.
12. Reset the PCS150R (see “Reset the PCS150R” on page 22).
Set the Time Zone
1. Log in to the PCS150R as described on page 13.
2. At the
Command >
prompt, type tz and press Enter.
The system displays the current time zone information for the PCS150R and prompts you
to specify whether or not you wish to change the time zone.
Current time zone is: America/New York
Change the time zone? [y/n]:
3. Either:
• Type n and press Enter to return to the Main Menu
Command >
prompt without changing
the current time zone.
• Type y and press Enter to change the time zone. Then, continue with step 4.
(Continued on next page)
