Applying labels to the base cover:
The new base cover FRU is shipped with a kit containing labels of several kinds.
When you replace the base cover, you need to apply the following labels:
2 Homologation label
12 Product label
12a Non-mercury label
Note: If the computer you are servicing is an LED-backlight LCD model,
you need to paste this label so that the notice for mercury on the product
label is covered.
Following labels need to be peeled off from the old base cover, and need to be
put on the new base cover.
1 Windows license label (COA)
3 MAC address label
4 IMEI label
5 Vodafone label
6 China modem label
7 FCC-ID label for wireless WAN
7a FCC-ID label for wireless WAN and wireless LAN
8 FCC-ID label for wireless LAN
9 SIRIM label
10 FCC-ID label for digitizer
11 Serial number label
For some models, you need to apply two or three FCC labels, 7 or 8 and
10. Check the old base cover; if it has two or three FCC labels, find duplicates
of them in the label kit and apply them to the new base cover.
For the location of each label, refer the following figure:
9
11
10
1 2 53 4
68
7
12a
12
140 ThinkPad X200 Tablet and X201 Tablet Hardware Maintenance Manual
