Testing Your Computer
Testing Your Computer
If you still have a problem with your computer after using the
Troubleshooting Charts, test the computer using the Easy-Setup
Test function.
To test your computer, do the following:
1
Press and hold F1; then power on the computer to start
Easy-Setup. Hold F1 until the “Easy-Setup” menu
appears:
Date/Time
Password
Easy-Setup
Start up
Test
Restart
Config
BIOS part number,Date
System-unit serial number
System board serial number
Microprocessor
nnnnnnnnnnnnnn
nnnnnnnnnnn
Pentium( ) IIProcessor
**
nnnnnnn
12/31/98
UUID
nnnnnnnn-nnnn-nnnn-nnnn-nnnnnnnnnnnn
Trademarkof Intel Corporation
**
You will hear a short beep. If you are not sure whether you
heard a beep, press Fn+PgUp a few times to make the
speaker volume loud. power off the computer and try again. If
you still don't hear a beep, the speaker is not working. Have
your computer serviced.
Chapter 4. Solving Computer Problems 131
Title: C79FPMST CreationDate: 06/22/98 12:26:52
