Table 26. Items in the Adapter List window (continued)
Item Description
FW Revision
The current rmware version
Status
Indicating whether the adapter on the boot list is enabled
or disabled
Boot Order
Indicating the boot sequence. You can change the
sequence by pressing + or -.
You can press Alt+N to switch to the Global Properties window to set the properties of boot and interrupt.
Table 27. Items on the Global Properties window
Item Description
Pause When Boot Alert Displayed Indicating whether to stop the boot when the alert occurs
during the boot. The current property can be changed by
pressing + or -.
No: Select this option if you want to continue to boot
when the alert occurs.
Yes: Select this option if you want to pause the boot
when the alert occurs and then you can press any key
to continue.
Boot Information Display Mode
Dening what will be displayed in the BIOS interface
during the boot. The current property can be changed by
pressing + or -.
Support Interrupt
Indicating the supported interrupt mode. Hook interrupt,
the Default is the default value, which supports booting
from CD-ROM in oppy emulation mode.
Restore Defaults Restoring default settings
Accessing the Adapter Properties window
In the Adapter List window, select C1068E and press Enter. The Adapter Properties window for SAS1068E
opens.
Table 28. Items in the Adapter Properties window for SAS1068E
Item Description
Adapter
The SAS adapter(s) detected
PCI Slot The PCI slot number assigned to the adapter
PCI Address (Bus/Dev) The PCI device or function assigned to the adapter
MPT Firmware Revision
The current rmware version
SAS Address The current SAS address
Status
Indicating whether the adapter on the boot list is enabled
or disabled
Boot Order
Indicating the boot sequence
Chapter 6. Conguring the server 89
