48
Using the Printer
■ Formfeed timeout time
The Formfeed timeout time menu adjusts the time-out time for the occurrence of the
printer’s formfeed action. Absence of data for this period of time causes a formfeed.
Level 1 Level 2 Range
Others Form feed time out 000 to 495 (seconds)
Note:
Any value from 0 to 495 [seconds] in 5-second increments. (The printer does not time
out with the value set to 0.)
■ Sleep timer
The Sleep timer menu adjusts the period of time after which the printer’s sleep
function is activated. During “sleeping,” all indicators and the ventilating fans will go off,
conserving electricity, until an operation is made from the control panel or print data is
received.
Level 1 Level 2 Range
Others Sleep timer 000 to 120 (minutes)
Note:
Any value from 0 to 120 [minutes] in 5-minute increments.
■ Print HEX-DUMP
The Print HEX-DUMP menu prints formatted hexadecimal data codes for debugging
programs and files.
Level 1 Level 2 Range
Others Print HEX-DUMP (To print in debugging mode, press ENTER
twice.)
■ List of resident fonts
The List of resident fonts menu prints a list of all resident fonts in the printer on
several pages.
Level 1 Level 2 Range
Others List of resident fonts (To print a list of resident fonts,
press ENTER twice.)
