A SERVICE OF

logo

Step 5
Slide Press Station Base Frame (11) over Press Arm Support (10). Next, attach both pieces to Base Frame
using two Nuts (144), four Washers (143), and two Bolts (134).
Install Left Top Frame (9) over Press Arm Support (10) and Top Frame assembly. Secure top section using
two Nuts (144), four Washers (143), and two Bolts (137). Next, Secure lower section using two Nuts (144),
four Washers (143), and two Bolts (136). Secure top of Guide Rods (47) using two Washers (143), two Spring
Washers (119), and two Allen Bolts (142).
Assembly
19
Figure 5